ST2 Stoke On Trent
Harder than the UK average. Expect visible limescale on kettles and taps.
At 247 ppm, Stoke On Trent sits among the UK's hardest water areas — compare it against the softest areas.
What this means for your home
Based on 247 ppm in Stoke On Trent (hard water).
- Significant limescale buildup in kettles, pipes and boilers
- Soap scum on shower screens and taps
- Higher energy bills from scale in heating elements
- Dry skin and dull hair after washing
- White residue on dishes and glassware
Should you soften the water in Stoke On Trent?
A verdict and running-cost estimate based on ST2's 247 ppm reading, for a typical 4-person household.
Hardness is moderate to hard, so a softener cuts scale and soap use and usually pays back over its lifetime.
Appliance impact at 247 ppm: noticeable: boiler/dishwasher life cut without descaling. Sized for a 4-person home; regenerates roughly every 11 days (estimate). Figures are conservative estimates and vary with household size and usage.
Hardness data for ST2
Sourced from Severn Trent Water's published water-quality reports and public records.
Hardness measurements
| Parts per million (ppm CaCO₃) | 247 |
| Degrees Clark (°Clark) | 17.3 |
| Degrees French (°fH) | 24.7 |
| Degrees German (°dH) | 13.8 |
| Calcium (mg/L Ca²⁺) | 99 |
Supplier and area
Enter your postcode and pick a timeframe to see your area's measured water quality including hardness, with a downloadable PDF report.
Other areas near Stoke On Trent
Common questions about ST2
What is the water hardness in ST2 Stoke On Trent?
Which water company supplies ST2?
Is the water in ST2 safe to drink?
How can I reduce water hardness in ST2?
What does 247 ppm water hardness mean?
What size water softener do I need in ST2?
How much does it cost to run a water softener in ST2?
Check another postcode
Compare hardness across areas before moving or buying a softener.