ST13 Leek
Harder than the UK average. Expect visible limescale on kettles and taps.
At 194 ppm, Leek sits among the UK's hardest water areas — compare it against the softest areas.
What this means for your home
Based on 194 ppm in Leek (hard water).
- Significant limescale buildup in kettles, pipes and boilers
- Soap scum on shower screens and taps
- Higher energy bills from scale in heating elements
- Dry skin and dull hair after washing
- White residue on dishes and glassware
Should you soften the water in Leek?
A verdict and running-cost estimate based on ST13's 194 ppm reading, for a typical 4-person household.
Hardness is moderate to hard, so a softener cuts scale and soap use and usually pays back over its lifetime.
Appliance impact at 194 ppm: slight: minor descaling extends kettle/boiler life. Sized for a 4-person home; regenerates roughly every 14 days (estimate). Figures are conservative estimates and vary with household size and usage.
Hardness data for ST13
Sourced from Severn Trent Water's published water-quality reports and public records.
Hardness measurements
| Parts per million (ppm CaCO₃) | 194 |
| Degrees Clark (°Clark) | 13.6 |
| Degrees French (°fH) | 19.4 |
| Degrees German (°dH) | 10.9 |
| Calcium (mg/L Ca²⁺) | 78 |
Supplier and area
Enter your postcode and pick a timeframe to see your area's measured water quality including hardness, with a downloadable PDF report.
Other areas near Leek
Common questions about ST13
What is the water hardness in ST13 Leek?
Which water company supplies ST13?
Is the water in ST13 safe to drink?
How can I reduce water hardness in ST13?
What does 194 ppm water hardness mean?
What size water softener do I need in ST13?
How much does it cost to run a water softener in ST13?
Check another postcode
Compare hardness across areas before moving or buying a softener.