LE13 Melton Mowbray
Near or below the UK average. Limescale builds slowly.
At 174 ppm, Melton Mowbray ranks near the UK's softest water areas — compare it against the hardest areas.
What this means for your home
Based on 174 ppm in Melton Mowbray (moderately hard water).
- Noticeable limescale buildup in kettles and boilers
- Soap may not lather as easily
- Showerhead may need descaling periodically
- Slight film on glassware after washing
Should you soften the water in Melton Mowbray?
A verdict and running-cost estimate based on LE13's 174 ppm reading, for a typical 4-person household.
Water is soft to moderate, so limescale and soap costs are low and a softener rarely pays back.
Appliance impact at 174 ppm: slight: minor descaling extends kettle/boiler life. Sized for a 4-person home; regenerates roughly every 15 days (estimate). Figures are conservative estimates and vary with household size and usage.
Hardness data for LE13
Sourced from Severn Trent Water's published water-quality reports and public records.
Hardness measurements
| Parts per million (ppm CaCO₃) | 174 |
| Degrees Clark (°Clark) | 12.2 |
| Degrees French (°fH) | 17.4 |
| Degrees German (°dH) | 9.7 |
| Calcium (mg/L Ca²⁺) | 70 |
Supplier and area
Enter your postcode and pick a timeframe to see your area's measured water quality including hardness, with a downloadable PDF report.
Other areas near Melton Mowbray
Common questions about LE13
What is the water hardness in LE13 Melton Mowbray?
Which water company supplies LE13?
Is the water in LE13 safe to drink?
How can I reduce water hardness in LE13?
What does 174 ppm water hardness mean?
What size water softener do I need in LE13?
How much does it cost to run a water softener in LE13?
Check another postcode
Compare hardness across areas before moving or buying a softener.