Water hardness

HU17 Beverley

Harder than the UK average. Expect visible limescale on kettles and taps.

At 241 ppm, Beverley sits among the UK's hardest water areas — compare it against the softest areas.

Hard 241 ppm Yorkshire Yorkshire Water
Your reading
241
parts per million
Soft
Moderate
Hard
Very hard
0100200300400+

What this means for your home

Based on 241 ppm in Beverley (hard water).

  • Significant limescale buildup in kettles, pipes and boilers
  • Soap scum on shower screens and taps
  • Higher energy bills from scale in heating elements
  • Dry skin and dull hair after washing
  • White residue on dishes and glassware
Heat loss
8%
Moderate scaling
Softener salt
£14–24
per year
Worth it?
Yes
at 241 ppm
Suggested for hard water
Whole-house water softener
Best long-term protection for boilers and pipes.
From £600 installed
Shower head filter
A simple first step for limescale on tiles and glass.
From £25
Filter jug or under-sink
Improves taste and reduces kettle scale.
From £20
Softening

Should you soften the water in Beverley?

A verdict and running-cost estimate based on HU17's 241 ppm reading, for a typical 4-person household.

Softener recommended

Hardness is moderate to hard, so a softener cuts scale and soap use and usually pays back over its lifetime.

Recommended size
24k
grain capacity, regenerates ~every 11.1 days
Salt running cost
£14–24
per year (~49 kg salt)
Limescale
8%
est. heater efficiency loss. Moderate scaling
Soap saving
Moderate
Noticeable saving: soaps lather more easily, cutting detergent use.

Appliance impact at 241 ppm: noticeable: boiler/dishwasher life cut without descaling. Sized for a 4-person home; regenerates roughly every 11 days (estimate). Figures are conservative estimates and vary with household size and usage.

Water quality details

Hardness data for HU17

Sourced from Yorkshire Water's published water-quality reports and public records.

Hardness measurements

Parts per million (ppm CaCO₃)241
Degrees Clark (°Clark)16.9
Degrees French (°fH)24.1
Degrees German (°dH)13.5
Calcium (mg/L Ca²⁺)97

Supplier and area

Water supplier Yorkshire Water
Region Yorkshire
County East Yorkshire
Hardness band Hard
UK average 207 ppm
Visit Yorkshire Water page
Official source
Yorkshire Water water-hardness report

Enter your postcode in the search tool to get the calcium and magnesium hardness level for your specific area.

Nearby

Other areas near Beverley

HU16
Cottingham
240ppm
Hard
HU18
Hornsea
242ppm
Hard
HU19
Withernsea
243ppm
Hard
FAQ

Common questions about HU17

What is the water hardness in HU17 Beverley?
The water in HU17 Beverley has a hardness level of 241 ppm (parts per million) calcium carbonate, classified as hard. This is 34 ppm above the UK national average of 207 ppm.
Which water company supplies HU17?
HU17 Beverley is supplied by Yorkshire Water. Yorkshire Water serves the Yorkshire region.
Is the water in HU17 safe to drink?
Yes. Hard water at 241 ppm is safe to drink. Water hardness affects taste and can cause limescale, but it is not a health risk. In fact, hard water contains beneficial minerals like calcium and magnesium.
How can I reduce water hardness in HU17?
For hard water at 241 ppm, a whole-house water softener is the most effective solution. You can also use a jug filter for drinking water, descaling products for appliances, and a shower filter for better skin and hair.
What does 241 ppm water hardness mean?
241 ppm means there are 241 parts per million of calcium carbonate dissolved in the water. This is equivalent to 16.9 Clark degrees, 13.5 German degrees, or 24.1 French degrees. Water above 180 ppm is generally considered hard.
What size water softener do I need in HU17?
For a typical 4-person home at 241 ppm, a 24,000 grain softener is a sensible size. It would regenerate roughly every 11.1 days. Larger households or higher daily use need a bigger unit. These figures are conservative estimates.
How much does it cost to run a water softener in HU17?
At 241 ppm, expect to use about 49 kg of salt a year, costing roughly £14–£24/year. Hardness is moderate to hard, so a softener cuts scale and soap use and usually pays back over its lifetime.

Fix hard water in Beverley

Enter your email and we will send the limescale fixes that actually work at 241 ppm, plus what to skip.

Check another postcode

Compare hardness across areas before moving or buying a softener.