E16 London
Harder than the UK average. Expect visible limescale on kettles and taps.
At 275 ppm, London sits among the UK's hardest water areas — compare it against the softest areas.
What this means for your home
Based on 275 ppm in London (hard water).
- Significant limescale buildup in kettles, pipes and boilers
- Soap scum on shower screens and taps
- Higher energy bills from scale in heating elements
- Dry skin and dull hair after washing
- White residue on dishes and glassware
Should you soften the water in London?
A verdict and running-cost estimate based on E16's 275 ppm reading, for a typical 4-person household.
Water is hard to very hard, so appliance, scale and soap savings typically pay back a softener within a few years.
Appliance impact at 275 ppm: noticeable: boiler/dishwasher life cut without descaling. Sized for a 4-person home; regenerates roughly every 10 days (estimate). Figures are conservative estimates and vary with household size and usage.
Hardness data for E16
Sourced from Thames Water's published water-quality reports and public records.
Hardness measurements
| Parts per million (ppm CaCO₃) | 275 |
| Degrees Clark (°Clark) | 19.2 |
| Degrees French (°fH) | 27.5 |
| Degrees German (°dH) | 15.4 |
| Calcium (mg/L Ca²⁺) | 110 |
Supplier and area
Read the hardness categories table to see where your supply falls; most of the region is hard to very hard at over 200 mg/l CaCO3.
Other areas near London
Common questions about E16
What is the water hardness in E16 London?
Which water company supplies E16?
Is the water in E16 safe to drink?
How can I reduce water hardness in E16?
What does 275 ppm water hardness mean?
What size water softener do I need in E16?
How much does it cost to run a water softener in E16?
Check another postcode
Compare hardness across areas before moving or buying a softener.