CA12 Keswick
Harder than the UK average. Expect visible limescale on kettles and taps.
At 205 ppm, Keswick sits among the UK's hardest water areas — compare it against the softest areas.
What this means for your home
Based on 205 ppm in Keswick (hard water).
- Significant limescale buildup in kettles, pipes and boilers
- Soap scum on shower screens and taps
- Higher energy bills from scale in heating elements
- Dry skin and dull hair after washing
- White residue on dishes and glassware
Should you soften the water in Keswick?
A verdict and running-cost estimate based on CA12's 205 ppm reading, for a typical 4-person household.
Hardness is moderate to hard, so a softener cuts scale and soap use and usually pays back over its lifetime.
Appliance impact at 205 ppm: noticeable: boiler/dishwasher life cut without descaling. Sized for a 4-person home; regenerates roughly every 13 days (estimate). Figures are conservative estimates and vary with household size and usage.
Hardness data for CA12
Sourced from Severn Trent Water's published water-quality reports and public records.
Hardness measurements
| Parts per million (ppm CaCO₃) | 205 |
| Degrees Clark (°Clark) | 14.3 |
| Degrees French (°fH) | 20.5 |
| Degrees German (°dH) | 11.5 |
| Calcium (mg/L Ca²⁺) | 82 |
Supplier and area
Enter your postcode and pick a timeframe to see your area's measured water quality including hardness, with a downloadable PDF report.
Other areas near Keswick
Common questions about CA12
What is the water hardness in CA12 Keswick?
Which water company supplies CA12?
Is the water in CA12 safe to drink?
How can I reduce water hardness in CA12?
What does 205 ppm water hardness mean?
What size water softener do I need in CA12?
How much does it cost to run a water softener in CA12?
Check another postcode
Compare hardness across areas before moving or buying a softener.