TW13 Feltham
Harder than the UK average. Expect visible limescale on kettles and taps.
At 277 ppm, Feltham sits among the UK's hardest water areas — compare it against the softest areas.
What this means for your home
Based on 277 ppm in Feltham (hard water).
- Significant limescale buildup in kettles, pipes and boilers
- Soap scum on shower screens and taps
- Higher energy bills from scale in heating elements
- Dry skin and dull hair after washing
- White residue on dishes and glassware
Should you soften the water in Feltham?
A verdict and running-cost estimate based on TW13's 277 ppm reading, for a typical 4-person household.
Water is hard to very hard, so appliance, scale and soap savings typically pay back a softener within a few years.
Appliance impact at 277 ppm: noticeable: boiler/dishwasher life cut without descaling. Sized for a 4-person home; regenerates roughly every 10 days (estimate). Figures are conservative estimates and vary with household size and usage.
Hardness data for TW13
Sourced from Thames Water's published water-quality reports and public records.
Hardness measurements
| Parts per million (ppm CaCO₃) | 277 |
| Degrees Clark (°Clark) | 19.4 |
| Degrees French (°fH) | 27.7 |
| Degrees German (°dH) | 15.5 |
| Calcium (mg/L Ca²⁺) | 111 |
Supplier and area
Read the hardness categories table to see where your supply falls; most of the region is hard to very hard at over 200 mg/l CaCO3.
Other areas near Feltham
Common questions about TW13
What is the water hardness in TW13 Feltham?
Which water company supplies TW13?
Is the water in TW13 safe to drink?
How can I reduce water hardness in TW13?
What does 277 ppm water hardness mean?
What size water softener do I need in TW13?
How much does it cost to run a water softener in TW13?
Check another postcode
Compare hardness across areas before moving or buying a softener.