TQ8 Salcombe
Near or below the UK average. Limescale builds slowly.
At 73 ppm, Salcombe ranks near the UK's softest water areas — compare it against the hardest areas.
What this means for your home
Based on 73 ppm in Salcombe (slightly hard water).
- Minor limescale may appear in kettles over time
- Soap lathers reasonably well
- Appliances generally unaffected
- Good balance of mineral taste
Should you soften the water in Salcombe?
A verdict and running-cost estimate based on TQ8's 73 ppm reading, for a typical 4-person household.
Water is soft to moderate, so limescale and soap costs are low and a softener rarely pays back.
Appliance impact at 73 ppm: negligible: appliances reach full expected life. Sized for a 4-person home; regenerates roughly every 37 days (estimate). Figures are conservative estimates and vary with household size and usage.
Hardness data for TQ8
Sourced from South West Water's published water-quality reports and public records.
Hardness measurements
| Parts per million (ppm CaCO₃) | 73 |
| Degrees Clark (°Clark) | 5.1 |
| Degrees French (°fH) | 7.3 |
| Degrees German (°dH) | 4.1 |
| Calcium (mg/L Ca²⁺) | 29 |
Supplier and area
Most of the region is soft water, except East Devon; use the postcode lookup on this page to find your address's specific water quality.
Other areas near Salcombe
Common questions about TQ8
What is the water hardness in TQ8 Salcombe?
Which water company supplies TQ8?
Is the water in TQ8 safe to drink?
How can I reduce water hardness in TQ8?
What does 73 ppm water hardness mean?
What size water softener do I need in TQ8?
How much does it cost to run a water softener in TQ8?
Your Salcombe water action plan
Enter your email for the short list of things worth doing at 73 ppm, and the upgrades you can safely ignore.
Check another postcode
Compare hardness across areas before moving or buying a softener.