Water hardness

TA6 Bridgwater

Near or below the UK average. Limescale builds slowly.

At 67 ppm, Bridgwater ranks near the UK's softest water areas — compare it against the hardest areas.

Slightly Hard 67 ppm South West South West Water
Your reading
67
parts per million
Soft
Moderate
Hard
Very hard
0100200300400+

What this means for your home

Based on 67 ppm in Bridgwater (slightly hard water).

  • Minor limescale may appear in kettles over time
  • Soap lathers reasonably well
  • Appliances generally unaffected
  • Good balance of mineral taste

Heat loss
1%
Minimal scaling
Softener salt
£4–7
per year
Worth it?
No
at 67 ppm
Suggested for slightly hard water
Filter jug (optional)
Mainly a taste preference, limescale won't be a real issue here.
From £20
Maintenance habits
Routine descaling once or twice a year is plenty.
Free
Softening

Should you soften the water in Bridgwater?

A verdict and running-cost estimate based on TA6's 67 ppm reading, for a typical 4-person household.

Softener optional

Water is soft to moderate, so limescale and soap costs are low and a softener rarely pays back.

Recommended size
24k
grain capacity, regenerates ~every 40 days
Salt running cost
£4–7
per year (~14 kg salt)
Limescale
1%
est. heater efficiency loss. Minimal scaling
Soap saving
Minimal
Water is already soft, so there is little detergent saving from softening.

Appliance impact at 67 ppm: negligible: appliances reach full expected life. Sized for a 4-person home; regenerates roughly every 40 days (estimate). Figures are conservative estimates and vary with household size and usage.

Water quality details

Hardness data for TA6

Sourced from South West Water's published water-quality reports and public records.

Hardness measurements

Parts per million (ppm CaCO₃)67
Degrees Clark (°Clark)4.7
Degrees French (°fH)6.7
Degrees German (°dH)3.8
Calcium (mg/L Ca²⁺)27

Supplier and area

Water supplier South West Water
Region South West
County Somerset
Hardness band Slightly Hard
UK average 207 ppm
Visit South West Water page
Official source
South West Water water-hardness report

Most of the region is soft water, except East Devon; use the postcode lookup on this page to find your address's specific water quality.

FAQ

Common questions about TA6

What is the water hardness in TA6 Bridgwater?
The water in TA6 Bridgwater has a hardness level of 67 ppm (parts per million) calcium carbonate, classified as slightly hard. This is 140 ppm below the UK national average of 207 ppm.
Which water company supplies TA6?
TA6 Bridgwater is supplied by South West Water. South West Water serves the South West region.
Is the water in TA6 safe to drink?
Yes. Slightly Hard water at 67 ppm is safe to drink. Water hardness affects taste and can cause limescale, but it is not a health risk. In fact, hard water contains beneficial minerals like calcium and magnesium.
How can I reduce water hardness in TA6?
At 67 ppm, the water in TA6 is slightly hard and unlikely to cause significant issues. A jug filter can improve taste, but a water softener is generally not necessary.
What does 67 ppm water hardness mean?
67 ppm means there are 67 parts per million of calcium carbonate dissolved in the water. This is equivalent to 4.7 Clark degrees, 3.8 German degrees, or 6.7 French degrees. Water above 180 ppm is generally considered hard.
What size water softener do I need in TA6?
For a typical 4-person home at 67 ppm, a 24,000 grain softener is a sensible size. It would regenerate roughly every 40 days. Larger households or higher daily use need a bigger unit. These figures are conservative estimates.
How much does it cost to run a water softener in TA6?
At 67 ppm, expect to use about 14 kg of salt a year, costing roughly £4–£7/year. Water is soft to moderate, so limescale and soap costs are low and a softener rarely pays back.

Your Bridgwater water action plan

Enter your email for the short list of things worth doing at 67 ppm, and the upgrades you can safely ignore.

Check another postcode

Compare hardness across areas before moving or buying a softener.