SA35 Llanfyrnach
Near or below the UK average. Limescale builds slowly.
At 113 ppm, Llanfyrnach ranks near the UK's softest water areas — compare it against the hardest areas.
What this means for your home
Based on 113 ppm in Llanfyrnach (slightly hard water).
- Minor limescale may appear in kettles over time
- Soap lathers reasonably well
- Appliances generally unaffected
- Good balance of mineral taste
Should you soften the water in Llanfyrnach?
A verdict and running-cost estimate based on SA35's 113 ppm reading, for a typical 4-person household.
Water is soft to moderate, so limescale and soap costs are low and a softener rarely pays back.
Appliance impact at 113 ppm: slight: minor descaling extends kettle/boiler life. Sized for a 4-person home; regenerates roughly every 24 days (estimate). Figures are conservative estimates and vary with household size and usage.
Hardness data for SA35
Sourced from Welsh Water (Dwr Cymru)'s published water-quality reports and public records.
Hardness measurements
| Parts per million (ppm CaCO₃) | 113 |
| Degrees Clark (°Clark) | 7.9 |
| Degrees French (°fH) | 11.3 |
| Degrees German (°dH) | 6.3 |
| Calcium (mg/L Ca²⁺) | 45 |
Supplier and area
Read the hardness explanation here, then enter your postcode on the linked drinking water quality checker to see your area's calcium and magnesium levels.
Other areas near Llanfyrnach
Common questions about SA35
What is the water hardness in SA35 Llanfyrnach?
Which water company supplies SA35?
Is the water in SA35 safe to drink?
How can I reduce water hardness in SA35?
What does 113 ppm water hardness mean?
What size water softener do I need in SA35?
How much does it cost to run a water softener in SA35?
Your Llanfyrnach water action plan
Enter your email for the short list of things worth doing at 113 ppm, and the upgrades you can safely ignore.
Check another postcode
Compare hardness across areas before moving or buying a softener.