SA10 Neath
Near or below the UK average. Limescale builds slowly.
At 42 ppm, Neath ranks near the UK's softest water areas — compare it against the hardest areas.
What this means for your home
Based on 42 ppm in Neath (soft water).
- Soap lathers easily with less product needed
- Minimal limescale buildup in appliances
- Gentle on skin and hair
- May taste slightly flat compared to harder water
Should you soften the water in Neath?
A verdict and running-cost estimate based on SA10's 42 ppm reading, for a typical 4-person household.
Water is soft to moderate, so limescale and soap costs are low and a softener rarely pays back.
Appliance impact at 42 ppm: negligible: appliances reach full expected life. Sized for a 4-person home; regenerates roughly every 64 days (estimate). Figures are conservative estimates and vary with household size and usage.
Hardness data for SA10
Sourced from Welsh Water (Dwr Cymru)'s published water-quality reports and public records.
Hardness measurements
| Parts per million (ppm CaCO₃) | 42 |
| Degrees Clark (°Clark) | 2.9 |
| Degrees French (°fH) | 4.2 |
| Degrees German (°dH) | 2.4 |
| Calcium (mg/L Ca²⁺) | 17 |
Supplier and area
Read the hardness explanation here, then enter your postcode on the linked drinking water quality checker to see your area's calcium and magnesium levels.
Other areas near Neath
Common questions about SA10
What is the water hardness in SA10 Neath?
Which water company supplies SA10?
Is the water in SA10 safe to drink?
How can I reduce water hardness in SA10?
What does 42 ppm water hardness mean?
What size water softener do I need in SA10?
How much does it cost to run a water softener in SA10?
Your Neath water action plan
Enter your email for the short list of things worth doing at 42 ppm, and the upgrades you can safely ignore.
Check another postcode
Compare hardness across areas before moving or buying a softener.