RM8 Dagenham
Harder than the UK average. Expect visible limescale on kettles and taps.
At 309 ppm, Dagenham sits among the UK's hardest water areas — compare it against the softest areas.
What this means for your home
Based on 309 ppm in Dagenham (very hard water).
- Heavy limescale requiring frequent descaling
- Blocked showerheads and reduced water flow
- Substantially higher energy bills from boiler scale
- Dry, itchy skin and lifeless hair
- White crusty deposits on taps and surfaces
- Reduced lifespan of washing machines and dishwashers
Should you soften the water in Dagenham?
A verdict and running-cost estimate based on RM8's 309 ppm reading, for a typical 4-person household.
Water is hard to very hard, so appliance, scale and soap savings typically pay back a softener within a few years.
Appliance impact at 309 ppm: significant: elements fur up, expect earlier failures. Sized for a 4-person home; regenerates roughly every 9 days (estimate). Figures are conservative estimates and vary with household size and usage.
Hardness data for RM8
Sourced from Thames Water's published water-quality reports and public records.
Hardness measurements
| Parts per million (ppm CaCO₃) | 309 |
| Degrees Clark (°Clark) | 21.6 |
| Degrees French (°fH) | 30.9 |
| Degrees German (°dH) | 17.3 |
| Calcium (mg/L Ca²⁺) | 124 |
Supplier and area
Read the hardness categories table to see where your supply falls; most of the region is hard to very hard at over 200 mg/l CaCO3.
Other areas near Dagenham
Common questions about RM8
What is the water hardness in RM8 Dagenham?
Which water company supplies RM8?
Is the water in RM8 safe to drink?
How can I reduce water hardness in RM8?
What does 309 ppm water hardness mean?
What size water softener do I need in RM8?
How much does it cost to run a water softener in RM8?
Check another postcode
Compare hardness across areas before moving or buying a softener.