Water hardness

PO34 Seaview

Harder than the UK average. Expect visible limescale on kettles and taps.

At 241 ppm, Seaview sits among the UK's hardest water areas — compare it against the softest areas.

Hard 241 ppm South East Portsmouth Water
Your reading
241
parts per million
Soft
Moderate
Hard
Very hard
0100200300400+

What this means for your home

Based on 241 ppm in Seaview (hard water).

  • Significant limescale buildup in kettles, pipes and boilers
  • Soap scum on shower screens and taps
  • Higher energy bills from scale in heating elements
  • Dry skin and dull hair after washing
  • White residue on dishes and glassware
Heat loss
8%
Moderate scaling
Softener salt
£14–24
per year
Worth it?
Yes
at 241 ppm
Suggested for hard water
Whole-house water softener
Best long-term protection for boilers and pipes.
From £600 installed
Shower head filter
A simple first step for limescale on tiles and glass.
From £25
Filter jug or under-sink
Improves taste and reduces kettle scale.
From £20
Softening

Should you soften the water in Seaview?

A verdict and running-cost estimate based on PO34's 241 ppm reading, for a typical 4-person household.

Softener recommended

Hardness is moderate to hard, so a softener cuts scale and soap use and usually pays back over its lifetime.

Recommended size
24k
grain capacity, regenerates ~every 11.1 days
Salt running cost
£14–24
per year (~49 kg salt)
Limescale
8%
est. heater efficiency loss. Moderate scaling
Soap saving
Moderate
Noticeable saving: soaps lather more easily, cutting detergent use.

Appliance impact at 241 ppm: noticeable: boiler/dishwasher life cut without descaling. Sized for a 4-person home; regenerates roughly every 11 days (estimate). Figures are conservative estimates and vary with household size and usage.

Water quality details

Hardness data for PO34

Sourced from Portsmouth Water's published water-quality reports and public records.

Hardness measurements

Parts per million (ppm CaCO₃)241
Degrees Clark (°Clark)16.9
Degrees French (°fH)24.1
Degrees German (°dH)13.5
Calcium (mg/L Ca²⁺)97

Supplier and area

Water supplier Portsmouth Water
Region South East
County Hampshire
Hardness band Hard
UK average 207 ppm
Visit Portsmouth Water page
Official source
Portsmouth Water water-hardness report

Find your supply zone on the map, then download the matching PDF to read your average water hardness and quality results.

Nearby

Other areas near Seaview

PO33
Ryde
240ppm
Hard
PO35
Bembridge
242ppm
Hard
PO36
Sandown
243ppm
Hard
FAQ

Common questions about PO34

What is the water hardness in PO34 Seaview?
The water in PO34 Seaview has a hardness level of 241 ppm (parts per million) calcium carbonate, classified as hard. This is 34 ppm above the UK national average of 207 ppm.
Which water company supplies PO34?
PO34 Seaview is supplied by Portsmouth Water. Portsmouth Water serves the South East region.
Is the water in PO34 safe to drink?
Yes. Hard water at 241 ppm is safe to drink. Water hardness affects taste and can cause limescale, but it is not a health risk. In fact, hard water contains beneficial minerals like calcium and magnesium.
How can I reduce water hardness in PO34?
For hard water at 241 ppm, a whole-house water softener is the most effective solution. You can also use a jug filter for drinking water, descaling products for appliances, and a shower filter for better skin and hair.
What does 241 ppm water hardness mean?
241 ppm means there are 241 parts per million of calcium carbonate dissolved in the water. This is equivalent to 16.9 Clark degrees, 13.5 German degrees, or 24.1 French degrees. Water above 180 ppm is generally considered hard.
What size water softener do I need in PO34?
For a typical 4-person home at 241 ppm, a 24,000 grain softener is a sensible size. It would regenerate roughly every 11.1 days. Larger households or higher daily use need a bigger unit. These figures are conservative estimates.
How much does it cost to run a water softener in PO34?
At 241 ppm, expect to use about 49 kg of salt a year, costing roughly £14–£24/year. Hardness is moderate to hard, so a softener cuts scale and soap use and usually pays back over its lifetime.

Fix hard water in Seaview

Enter your email and we will send the limescale fixes that actually work at 241 ppm, plus what to skip.

Check another postcode

Compare hardness across areas before moving or buying a softener.