Water hardness

LS5 Leeds

Harder than the UK average. Expect visible limescale on kettles and taps.

At 295 ppm, Leeds sits among the UK's hardest water areas — compare it against the softest areas.

Hard 295 ppm Yorkshire Yorkshire Water
Your reading
295
parts per million
Soft
Moderate
Hard
Very hard
0100200300400+

What this means for your home

Based on 295 ppm in Leeds (hard water).

  • Significant limescale buildup in kettles, pipes and boilers
  • Soap scum on shower screens and taps
  • Higher energy bills from scale in heating elements
  • Dry skin and dull hair after washing
  • White residue on dishes and glassware

Heat loss
8%
Moderate scaling
Softener salt
£17–29
per year
Worth it?
Yes
at 295 ppm
Suggested for hard water
Whole-house water softener
Best long-term protection for boilers and pipes.
From £600 installed
Shower head filter
A simple first step for limescale on tiles and glass.
From £25
Filter jug or under-sink
Improves taste and reduces kettle scale.
From £20
Softening

Should you soften the water in Leeds?

A verdict and running-cost estimate based on LS5's 295 ppm reading, for a typical 4-person household.

Softener recommended

Water is hard to very hard, so appliance, scale and soap savings typically pay back a softener within a few years.

Recommended size
24k
grain capacity, regenerates ~every 9.1 days
Salt running cost
£17–29
per year (~60 kg salt)
Limescale
8%
est. heater efficiency loss. Moderate scaling
Soap saving
Moderate
Noticeable saving: soaps lather more easily, cutting detergent use.

Appliance impact at 295 ppm: noticeable: boiler/dishwasher life cut without descaling. Sized for a 4-person home; regenerates roughly every 9 days (estimate). Figures are conservative estimates and vary with household size and usage.

Water quality details

Hardness data for LS5

Sourced from Yorkshire Water's published water-quality reports and public records.

Hardness measurements

Parts per million (ppm CaCO₃)295
Degrees Clark (°Clark)20.6
Degrees French (°fH)29.5
Degrees German (°dH)16.5
Calcium (mg/L Ca²⁺)118

Supplier and area

Water supplier Yorkshire Water
Region Yorkshire
County West Yorkshire
Hardness band Hard
UK average 207 ppm
Visit Yorkshire Water page
Official source
Yorkshire Water water-hardness report

Enter your postcode in the search tool to get the calcium and magnesium hardness level for your specific area.

FAQ

Common questions about LS5

What is the water hardness in LS5 Leeds?
The water in LS5 Leeds has a hardness level of 295 ppm (parts per million) calcium carbonate, classified as hard. This is 88 ppm above the UK national average of 207 ppm.
Which water company supplies LS5?
LS5 Leeds is supplied by Yorkshire Water. Yorkshire Water serves the Yorkshire region.
Is the water in LS5 safe to drink?
Yes. Hard water at 295 ppm is safe to drink. Water hardness affects taste and can cause limescale, but it is not a health risk. In fact, hard water contains beneficial minerals like calcium and magnesium.
How can I reduce water hardness in LS5?
For hard water at 295 ppm, a whole-house water softener is the most effective solution. You can also use a jug filter for drinking water, descaling products for appliances, and a shower filter for better skin and hair.
What does 295 ppm water hardness mean?
295 ppm means there are 295 parts per million of calcium carbonate dissolved in the water. This is equivalent to 20.6 Clark degrees, 16.5 German degrees, or 29.5 French degrees. Water above 180 ppm is generally considered hard.
What size water softener do I need in LS5?
For a typical 4-person home at 295 ppm, a 24,000 grain softener is a sensible size. It would regenerate roughly every 9.1 days. Larger households or higher daily use need a bigger unit. These figures are conservative estimates.
How much does it cost to run a water softener in LS5?
At 295 ppm, expect to use about 60 kg of salt a year, costing roughly £17–£29/year. Water is hard to very hard, so appliance, scale and soap savings typically pay back a softener within a few years.

Fix hard water in Leeds

Enter your email and we will send the limescale fixes that actually work at 295 ppm, plus what to skip.

Check another postcode

Compare hardness across areas before moving or buying a softener.