Water hardness

L20 Bootle

Near or below the UK average. Limescale builds slowly.

At 34 ppm, Bootle ranks near the UK's softest water areas — compare it against the hardest areas.

Soft 34 ppm North West United Utilities
Your reading
34
parts per million
Soft
Moderate
Hard
Very hard
0100200300400+

What this means for your home

Based on 34 ppm in Bootle (soft water).

  • Soap lathers easily with less product needed
  • Minimal limescale buildup in appliances
  • Gentle on skin and hair
  • May taste slightly flat compared to harder water

Heat loss
1%
Minimal scaling
Softener salt
£2–3
per year
Worth it?
No
at 34 ppm
Suggested for soft water
Filter jug (optional)
Mainly a taste preference, limescale won't be a real issue here.
From £20
Maintenance habits
Routine descaling once or twice a year is plenty.
Free
Softening

Should you soften the water in Bootle?

A verdict and running-cost estimate based on L20's 34 ppm reading, for a typical 4-person household.

Softener optional

Water is soft to moderate, so limescale and soap costs are low and a softener rarely pays back.

Recommended size
24k
grain capacity, regenerates ~every 78.8 days
Salt running cost
£2–3
per year (~7 kg salt)
Limescale
1%
est. heater efficiency loss. Minimal scaling
Soap saving
Minimal
Water is already soft, so there is little detergent saving from softening.

Appliance impact at 34 ppm: negligible: appliances reach full expected life. Sized for a 4-person home; regenerates roughly every 79 days (estimate). Figures are conservative estimates and vary with household size and usage.

Water quality details

Hardness data for L20

Sourced from United Utilities's published water-quality reports and public records.

Hardness measurements

Parts per million (ppm CaCO₃)34
Degrees Clark (°Clark)2.4
Degrees French (°fH)3.4
Degrees German (°dH)1.9
Calcium (mg/L Ca²⁺)14

Supplier and area

Water supplier United Utilities
Region North West
County Merseyside
Hardness band Soft
UK average 207 ppm
Visit United Utilities page
Official source
United Utilities Water Ltd water-hardness report

Read the hardness explainer (most North West water is soft or very soft) and download the factsheet for conversion tables.

FAQ

Common questions about L20

What is the water hardness in L20 Bootle?
The water in L20 Bootle has a hardness level of 34 ppm (parts per million) calcium carbonate, classified as soft. This is 173 ppm below the UK national average of 207 ppm.
Which water company supplies L20?
L20 Bootle is supplied by United Utilities. United Utilities serves the North West region.
Is the water in L20 safe to drink?
Yes. Soft water at 34 ppm is safe to drink. Water hardness affects taste and can cause limescale, but it is not a health risk. In fact, hard water contains beneficial minerals like calcium and magnesium.
How can I reduce water hardness in L20?
At 34 ppm, the water in L20 is soft and unlikely to cause significant issues. A jug filter can improve taste, but a water softener is generally not necessary.
What does 34 ppm water hardness mean?
34 ppm means there are 34 parts per million of calcium carbonate dissolved in the water. This is equivalent to 2.4 Clark degrees, 1.9 German degrees, or 3.4 French degrees. Water above 180 ppm is generally considered hard.
What size water softener do I need in L20?
For a typical 4-person home at 34 ppm, a 24,000 grain softener is a sensible size. It would regenerate roughly every 78.8 days. Larger households or higher daily use need a bigger unit. These figures are conservative estimates.
How much does it cost to run a water softener in L20?
At 34 ppm, expect to use about 7 kg of salt a year, costing roughly £2–£3/year. Water is soft to moderate, so limescale and soap costs are low and a softener rarely pays back.

Your Bootle water action plan

Enter your email for the short list of things worth doing at 34 ppm, and the upgrades you can safely ignore.

Check another postcode

Compare hardness across areas before moving or buying a softener.