Water hardness

FY1 Blackpool

Near or below the UK average. Limescale builds slowly.

At 112 ppm, Blackpool ranks near the UK's softest water areas — compare it against the hardest areas.

Slightly Hard 112 ppm North West United Utilities
Your reading
112
parts per million
Soft
Moderate
Hard
Very hard
0100200300400+

What this means for your home

Based on 112 ppm in Blackpool (slightly hard water).

  • Minor limescale may appear in kettles over time
  • Soap lathers reasonably well
  • Appliances generally unaffected
  • Good balance of mineral taste

Heat loss
4%
Light scaling
Softener salt
£6–11
per year
Worth it?
No
at 112 ppm
Suggested for slightly hard water
Filter jug (optional)
Mainly a taste preference, limescale won't be a real issue here.
From £20
Maintenance habits
Routine descaling once or twice a year is plenty.
Free
Softening

Should you soften the water in Blackpool?

A verdict and running-cost estimate based on FY1's 112 ppm reading, for a typical 4-person household.

Softener optional

Water is soft to moderate, so limescale and soap costs are low and a softener rarely pays back.

Recommended size
24k
grain capacity, regenerates ~every 23.9 days
Salt running cost
£6–11
per year (~23 kg salt)
Limescale
4%
est. heater efficiency loss. Light scaling
Soap saving
Low
Some saving: expect to use slightly less soap and detergent.

Appliance impact at 112 ppm: slight: minor descaling extends kettle/boiler life. Sized for a 4-person home; regenerates roughly every 24 days (estimate). Figures are conservative estimates and vary with household size and usage.

Water quality details

Hardness data for FY1

Sourced from United Utilities's published water-quality reports and public records.

Hardness measurements

Parts per million (ppm CaCO₃)112
Degrees Clark (°Clark)7.8
Degrees French (°fH)11.2
Degrees German (°dH)6.3
Calcium (mg/L Ca²⁺)45

Supplier and area

Water supplier United Utilities
Region North West
County Lancashire
Hardness band Slightly Hard
UK average 207 ppm
Visit United Utilities page
Official source
United Utilities Water Ltd water-hardness report

Read the hardness explainer (most North West water is soft or very soft) and download the factsheet for conversion tables.

FAQ

Common questions about FY1

What is the water hardness in FY1 Blackpool?
The water in FY1 Blackpool has a hardness level of 112 ppm (parts per million) calcium carbonate, classified as slightly hard. This is 95 ppm below the UK national average of 207 ppm.
Which water company supplies FY1?
FY1 Blackpool is supplied by United Utilities. United Utilities serves the North West region.
Is the water in FY1 safe to drink?
Yes. Slightly Hard water at 112 ppm is safe to drink. Water hardness affects taste and can cause limescale, but it is not a health risk. In fact, hard water contains beneficial minerals like calcium and magnesium.
How can I reduce water hardness in FY1?
At 112 ppm, the water in FY1 is slightly hard and unlikely to cause significant issues. A jug filter can improve taste, but a water softener is generally not necessary.
What does 112 ppm water hardness mean?
112 ppm means there are 112 parts per million of calcium carbonate dissolved in the water. This is equivalent to 7.8 Clark degrees, 6.3 German degrees, or 11.2 French degrees. Water above 180 ppm is generally considered hard.
What size water softener do I need in FY1?
For a typical 4-person home at 112 ppm, a 24,000 grain softener is a sensible size. It would regenerate roughly every 23.9 days. Larger households or higher daily use need a bigger unit. These figures are conservative estimates.
How much does it cost to run a water softener in FY1?
At 112 ppm, expect to use about 23 kg of salt a year, costing roughly £6–£11/year. Water is soft to moderate, so limescale and soap costs are low and a softener rarely pays back.

Your Blackpool water action plan

Enter your email for the short list of things worth doing at 112 ppm, and the upgrades you can safely ignore.

Check another postcode

Compare hardness across areas before moving or buying a softener.