DA17 Belvedere
Harder than the UK average. Expect visible limescale on kettles and taps.
At 261 ppm, Belvedere sits among the UK's hardest water areas — compare it against the softest areas.
What this means for your home
Based on 261 ppm in Belvedere (hard water).
- Significant limescale buildup in kettles, pipes and boilers
- Soap scum on shower screens and taps
- Higher energy bills from scale in heating elements
- Dry skin and dull hair after washing
- White residue on dishes and glassware
Should you soften the water in Belvedere?
A verdict and running-cost estimate based on DA17's 261 ppm reading, for a typical 4-person household.
Water is hard to very hard, so appliance, scale and soap savings typically pay back a softener within a few years.
Appliance impact at 261 ppm: noticeable: boiler/dishwasher life cut without descaling. Sized for a 4-person home; regenerates roughly every 10 days (estimate). Figures are conservative estimates and vary with household size and usage.
Hardness data for DA17
Sourced from Thames Water's published water-quality reports and public records.
Hardness measurements
| Parts per million (ppm CaCO₃) | 261 |
| Degrees Clark (°Clark) | 18.3 |
| Degrees French (°fH) | 26.1 |
| Degrees German (°dH) | 14.6 |
| Calcium (mg/L Ca²⁺) | 105 |
Supplier and area
Read the hardness categories table to see where your supply falls; most of the region is hard to very hard at over 200 mg/l CaCO3.
Other areas near Belvedere
Common questions about DA17
What is the water hardness in DA17 Belvedere?
Which water company supplies DA17?
Is the water in DA17 safe to drink?
How can I reduce water hardness in DA17?
What does 261 ppm water hardness mean?
What size water softener do I need in DA17?
How much does it cost to run a water softener in DA17?
Check another postcode
Compare hardness across areas before moving or buying a softener.