DA13 Gravesend
Harder than the UK average. Expect visible limescale on kettles and taps.
At 257 ppm, Gravesend sits among the UK's hardest water areas — compare it against the softest areas.
What this means for your home
Based on 257 ppm in Gravesend (hard water).
- Significant limescale buildup in kettles, pipes and boilers
- Soap scum on shower screens and taps
- Higher energy bills from scale in heating elements
- Dry skin and dull hair after washing
- White residue on dishes and glassware
Should you soften the water in Gravesend?
A verdict and running-cost estimate based on DA13's 257 ppm reading, for a typical 4-person household.
Water is hard to very hard, so appliance, scale and soap savings typically pay back a softener within a few years.
Appliance impact at 257 ppm: noticeable: boiler/dishwasher life cut without descaling. Sized for a 4-person home; regenerates roughly every 10 days (estimate). Figures are conservative estimates and vary with household size and usage.
Hardness data for DA13
Sourced from Thames Water's published water-quality reports and public records.
Hardness measurements
| Parts per million (ppm CaCO₃) | 257 |
| Degrees Clark (°Clark) | 18 |
| Degrees French (°fH) | 25.7 |
| Degrees German (°dH) | 14.4 |
| Calcium (mg/L Ca²⁺) | 103 |
Supplier and area
Read the hardness categories table to see where your supply falls; most of the region is hard to very hard at over 200 mg/l CaCO3.
Other areas near Gravesend
Common questions about DA13
What is the water hardness in DA13 Gravesend?
Which water company supplies DA13?
Is the water in DA13 safe to drink?
How can I reduce water hardness in DA13?
What does 257 ppm water hardness mean?
What size water softener do I need in DA13?
How much does it cost to run a water softener in DA13?
Check another postcode
Compare hardness across areas before moving or buying a softener.