Water hardness

BS49 Bristol

Harder than the UK average. Expect visible limescale on kettles and taps.

At 284 ppm, Bristol sits among the UK's hardest water areas — compare it against the softest areas.

Hard 284 ppm South West Wessex Water
Your reading
284
parts per million
Soft
Moderate
Hard
Very hard
0100200300400+

What this means for your home

Based on 284 ppm in Bristol (hard water).

  • Significant limescale buildup in kettles, pipes and boilers
  • Soap scum on shower screens and taps
  • Higher energy bills from scale in heating elements
  • Dry skin and dull hair after washing
  • White residue on dishes and glassware
Heat loss
8%
Moderate scaling
Softener salt
£16–28
per year
Worth it?
Yes
at 284 ppm
Suggested for hard water
Whole-house water softener
Best long-term protection for boilers and pipes.
From £600 installed
Shower head filter
A simple first step for limescale on tiles and glass.
From £25
Filter jug or under-sink
Improves taste and reduces kettle scale.
From £20
Softening

Should you soften the water in Bristol?

A verdict and running-cost estimate based on BS49's 284 ppm reading, for a typical 4-person household.

Softener recommended

Water is hard to very hard, so appliance, scale and soap savings typically pay back a softener within a few years.

Recommended size
24k
grain capacity, regenerates ~every 9.4 days
Salt running cost
£16–28
per year (~58 kg salt)
Limescale
8%
est. heater efficiency loss. Moderate scaling
Soap saving
Moderate
Noticeable saving: soaps lather more easily, cutting detergent use.

Appliance impact at 284 ppm: noticeable: boiler/dishwasher life cut without descaling. Sized for a 4-person home; regenerates roughly every 9 days (estimate). Figures are conservative estimates and vary with household size and usage.

Water quality details

Hardness data for BS49

Sourced from Wessex Water's published water-quality reports and public records.

Hardness measurements

Parts per million (ppm CaCO₃)284
Degrees Clark (°Clark)19.9
Degrees French (°fH)28.4
Degrees German (°dH)15.9
Calcium (mg/L Ca²⁺)114

Supplier and area

Water supplier Wessex Water
Region South West
County Bristol
Hardness band Hard
UK average 207 ppm
Visit Wessex Water page
Official source
Wessex Water water-hardness report

Read the hardness and limescale guidance here, then use the postcode checker to see your local hardness value.

Nearby

Other areas near Bristol

BS48
Bristol
283ppm
Hard
FAQ

Common questions about BS49

What is the water hardness in BS49 Bristol?
The water in BS49 Bristol has a hardness level of 284 ppm (parts per million) calcium carbonate, classified as hard. This is 77 ppm above the UK national average of 207 ppm.
Which water company supplies BS49?
BS49 Bristol is supplied by Wessex Water. Wessex Water serves the South West region.
Is the water in BS49 safe to drink?
Yes. Hard water at 284 ppm is safe to drink. Water hardness affects taste and can cause limescale, but it is not a health risk. In fact, hard water contains beneficial minerals like calcium and magnesium.
How can I reduce water hardness in BS49?
For hard water at 284 ppm, a whole-house water softener is the most effective solution. You can also use a jug filter for drinking water, descaling products for appliances, and a shower filter for better skin and hair.
What does 284 ppm water hardness mean?
284 ppm means there are 284 parts per million of calcium carbonate dissolved in the water. This is equivalent to 19.9 Clark degrees, 15.9 German degrees, or 28.4 French degrees. Water above 180 ppm is generally considered hard.
What size water softener do I need in BS49?
For a typical 4-person home at 284 ppm, a 24,000 grain softener is a sensible size. It would regenerate roughly every 9.4 days. Larger households or higher daily use need a bigger unit. These figures are conservative estimates.
How much does it cost to run a water softener in BS49?
At 284 ppm, expect to use about 58 kg of salt a year, costing roughly £16–£28/year. Water is hard to very hard, so appliance, scale and soap savings typically pay back a softener within a few years.

Fix hard water in Bristol

Enter your email and we will send the limescale fixes that actually work at 284 ppm, plus what to skip.

Check another postcode

Compare hardness across areas before moving or buying a softener.