Water hardness

BR1 Bromley

Harder than the UK average. Expect visible limescale on kettles and taps.

At 293 ppm, Bromley sits among the UK's hardest water areas — compare it against the softest areas.

Hard 293 ppm London South East Water
Your reading
293
parts per million
Soft
Moderate
Hard
Very hard
0100200300400+

What this means for your home

Based on 293 ppm in Bromley (hard water).

  • Significant limescale buildup in kettles, pipes and boilers
  • Soap scum on shower screens and taps
  • Higher energy bills from scale in heating elements
  • Dry skin and dull hair after washing
  • White residue on dishes and glassware
Heat loss
8%
Moderate scaling
Softener salt
£17–29
per year
Worth it?
Yes
at 293 ppm
Suggested for hard water
Whole-house water softener
Best long-term protection for boilers and pipes.
From £600 installed
Shower head filter
A simple first step for limescale on tiles and glass.
From £25
Filter jug or under-sink
Improves taste and reduces kettle scale.
From £20
Softening

Should you soften the water in Bromley?

A verdict and running-cost estimate based on BR1's 293 ppm reading, for a typical 4-person household.

Softener recommended

Water is hard to very hard, so appliance, scale and soap savings typically pay back a softener within a few years.

Recommended size
24k
grain capacity, regenerates ~every 9.1 days
Salt running cost
£17–29
per year (~60 kg salt)
Limescale
8%
est. heater efficiency loss. Moderate scaling
Soap saving
Moderate
Noticeable saving: soaps lather more easily, cutting detergent use.

Appliance impact at 293 ppm: noticeable: boiler/dishwasher life cut without descaling. Sized for a 4-person home; regenerates roughly every 9 days (estimate). Figures are conservative estimates and vary with household size and usage.

Water quality details

Hardness data for BR1

Sourced from South East Water's published water-quality reports and public records.

Hardness measurements

Parts per million (ppm CaCO₃)293
Degrees Clark (°Clark)20.5
Degrees French (°fH)29.3
Degrees German (°dH)16.4
Calcium (mg/L Ca²⁺)117

Supplier and area

Water supplier South East Water
Region London
County Greater London
Hardness band Hard
UK average 207 ppm
Visit South East Water page
Official source
South East Water water-hardness report

Use the hardness checker to find your water hardness level so you can set the correct settings on your dishwasher, coffee maker, and washing machine.

Nearby

Other areas near Bromley

BR2
Bromley
294ppm
Hard
BR3
Beckenham
295ppm
Hard
FAQ

Common questions about BR1

What is the water hardness in BR1 Bromley?
The water in BR1 Bromley has a hardness level of 293 ppm (parts per million) calcium carbonate, classified as hard. This is 86 ppm above the UK national average of 207 ppm.
Which water company supplies BR1?
BR1 Bromley is supplied by South East Water. South East Water serves the London region.
Is the water in BR1 safe to drink?
Yes. Hard water at 293 ppm is safe to drink. Water hardness affects taste and can cause limescale, but it is not a health risk. In fact, hard water contains beneficial minerals like calcium and magnesium.
How can I reduce water hardness in BR1?
For hard water at 293 ppm, a whole-house water softener is the most effective solution. You can also use a jug filter for drinking water, descaling products for appliances, and a shower filter for better skin and hair.
What does 293 ppm water hardness mean?
293 ppm means there are 293 parts per million of calcium carbonate dissolved in the water. This is equivalent to 20.5 Clark degrees, 16.4 German degrees, or 29.3 French degrees. Water above 180 ppm is generally considered hard.
What size water softener do I need in BR1?
For a typical 4-person home at 293 ppm, a 24,000 grain softener is a sensible size. It would regenerate roughly every 9.1 days. Larger households or higher daily use need a bigger unit. These figures are conservative estimates.
How much does it cost to run a water softener in BR1?
At 293 ppm, expect to use about 60 kg of salt a year, costing roughly £17–£29/year. Water is hard to very hard, so appliance, scale and soap savings typically pay back a softener within a few years.

Fix hard water in Bromley

Enter your email and we will send the limescale fixes that actually work at 293 ppm, plus what to skip.

Check another postcode

Compare hardness across areas before moving or buying a softener.